LaserLiner SuperPlane-Laser 3D Pro Mode D'emploi page 15

SuperPlane-Laser 3D Pro / SuperPlane-Laser 3G Pro
9
8
1
1
Use of lithium-ion rechargeable battery
Fully charge the battery before using for
the first time. To charge the battery, place
it in the supplied battery charger. Ensure
the battery is inserted the right way round.
When the rechargeable battery is being
charged, the LED on the charger lights
up red. When the LED changes to green,
charging is complete. The LED (8) flashing
indicates that the battery charge level is
low. The laser lines automatically switch
off when the battery charge is very low.
In that case, recharge the battery.
7
6
5
2
b
a
3
4
1 Laser emitting window
2
Slide switch
a ON
b OFF / Slope mode /
Transport lock
3 Rechargeable battery
compartment (bottom)
4 1/4"/5/8"-tripod threads
(bottom)
5 Connecting socket
for mains adapter
(12V / 2000mA, no
charging function)
6 LED Hand receiver mode
7 Hand receiver mode
8 LED Status indicator /
Battery charge
9 Laser line selection button
2.
1.
15
EN