Initial Start Up; Adjustment Of Detergent; Limiting Nozzle (Su21Pd22/Su11Pd22); Adjustment Of Air - Ecolab Hybrid Penta SU11PD22 Mode D'emploi

7. Initial start up

7.1. Adjustment of detergent

Adjustment of detergent can be done by means of a
limiting nozzle.
7.1.1.

Limiting nozzle (SU21PD22/SU11PD22)

Remove cover from the unit.
The limiting nozzle is placed in the suction nipple of
the non-retur valve (110006098) and can be re-
placed with a smaller or larger nozzle depending on
the concentration needed, please also see table for
guidelines.
Reinstall cover when adjustment is done.
All tests have been made with water.
Nozzle size in mm Concentration by 20 Bar in %
0,4
0,5
0,6
0,7
0,8
0,9
1,0
1,1
1,5
16

7.2. Adjustment of air

Remove the cover from the unit.
Adjust the air pressure on the reduction valve until an
appropriate foam quality is reached.
110006098
0,75
1,15
1,65
2,20
2,90
3,60
4,40
5,3
9,4
When setting the regulator, carefully
pull up the knob and turn it clockwise
for pressure increase and counter
clock wise for pressure decrease.
110003805