Laying The Cables; Connecting The Subwoofer To The Mains - Loewe Individual Sound Subwoofer Highline Mode D'emploi

Connection
Connecting the speakers to the subwoofer
Connect the speaker cable to the speaker according to the appropriate instal-
lation instructions. One of the two wires of the speaker cable is marked black
in the usual way. Connect this black marked cable respectively with the black
screw terminal to the subwoofer
the black terminal on the speaker.
Turn the screw connection of the respective terminal on the subwoofer anti-
clockwise about 5 turns for this. Feed the wire end into the screw terminal (top
right hand side) and close the screw terminal in clockwise direction.
Connect the unmarked wires with the red terminals.

Laying the cables

Feed all cables down through the slot in the housing of the subwoofer. Bundle
the cables with the Velcro tape provided.
You can feed the cables tidily out of the subwoofer with the fabric hose availa-
ble as an accessory.
Left Subw Right
Phase
180° 0°
AudioLink
-3dB
Left Right
Equaliser
Line In
+6dB
50Hz
Crossover
Frequency
250Hz
min
Bass
Intensity
max
Front Rear
Left Right Center Left Right

Connecting the subwoofer to the mains

Plug the mains plug of the subwoofer into a 230 V AC socket.
(connection diagram see figure right) and
Rear
Front
Power Mode
OFF ON Auto Manu.
Speaker
Out
Front
left
Individual Sound Subwoofer Highline
Left Subw Right
Phase
Rear
0°
180°
AudioLink
Front
-3dB
Left Right
Equalizer
Line In
+6dB
50Hz
Crossover
Frequency
250Hz
min
Bass
Intensity
max
Front Rear
Left Right Center Left Right
Speaker
Out
Rear
left
Front
right
Power Mode
OFF ON Auto Manu.
Rear
right
19 -