Combining Multiple Drivers - HumanTechnik AUDIOropa PRO LOOP D15 LOS Mode D'emploi

4.7 Combining multiple drivers

4.7.1 Master over Slave
Master unit
»OUT« Output
To establish a low overspill or high coverage system:
- Connect the respective inductive loops to the »speakON« connectors on the drivers.
- Connect an audio source to INPUT 1, 2 or 3 of the Master driver unit.
- Connect the »OUT« output jack socket of the Master unit to the »IN« jack socket of the
Slave unit using a 6.35mm to 6.35mm jack cord.
- Power all components up and adjust accordingly.
This allows you to utilise several drivers on the same input. This can be of use for very
large rooms or if several rooms share the same audio transmission.
connected to
Slave unit
»IN« Input
English 31