Cycle And Option Descriptions - Whirlpool WDF520PADM Mode D'emploi

Table des Matières

Les langues disponibles

This information covers several different models. Your dishwasher may not have all of the cycles and options described. Estimated

cycle times may increase or decrease depending on water temperature, soil conditions, dish load size, and options selected. You can

customize your cycle by selecting an option.

See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can

change an option anytime before the selected option begins. At each stage of the wash cycle, you may hear noises that you are not

used to hearing in your previous dishwasher. Each cycle will provide a series of pauses and water sprays throughout the wash cycle.

This is normal and will provide optimal cleaning performance.

The most advanced and versatile cycle. This cycle senses load size, soil amount,

and toughness of soil, to adjust the cycle for optimal cleaning using only the

amount of water and energy needed. Use for all soil levels.

Use for hard-to-clean, heavily soiled pots, pans, casseroles, and tableware.

This cycle, with only the Heat Dry option selected, and without other options

selected, is recommended to completely wash and dry a full load of normally

soiled dishes. The energy usage label is based on this cycle and option

combination.

For fast results, 1-Hour Wash will clean dishes using slightly more water and

energy. Select the Heat Dry option to provide best drying performance.

This cycle quietly soaks dishes with an extended prewash which eliminates the

need to presoak dishes, saving personal time and effort. For optimal cleaning

results during the Soak & Clean cycle, add prewash detergent. Use this cycle

for loads with heavy amounts of dried-on or hard-to-clean baked-on food.

IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts

the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy,

the cycle will automatically compensate by adding time, heat and water as needed.

OPTION SELECTIONS

OPTIONS

Raises main wash temperature to improve

cleaning for loads containing tough, baked-on

food.

Sanitizes dishes and glassware in accordance

with NSF International NSF/ANSI Standard 184

for Residential Dishwashers. Certified residential

dishwashers are not intended for licensed food

establishments. The Sanitized indicator at the end

of the cycle shows whether the Sani Rinse option

was successfully completed. If the indicator does

not activate, it is probably due to cycle being

interrupted.

Cycle and Option Descriptions

CYCLE SELECTIONS

CYCLES

CAN BE

WHAT IT DOES

SELECTED

WITH

Sensor

Raises the main

Heavy

wash temperature

Normal

to 135°F (57°C).

Soak & Clean

Sensor

Raises the main

Heavy

wash temperature

Normal

to 135°F (57°C)

and the final rinse

temperature to

156°F (69°C).

ESTIMATED

WATER USAGE

WASH TIME

GALLONS

(HH:MM)

(LITERS)