Operating The Electronic Clock - Siemens HG73G8256M Notice D'utilisation

Removing the rotary spit
:
Risk of burns!
Never touch the hot surfaces of the cooking compartment or
the heating elements. Children must be kept at a safe distance
from the appliance at all times. Open the appliance door
carefully. Hot steam may escape.
:
Risk of burns!
Never touch the rotary spit or other accessories directly when
they are hot. Always wear oven gloves or heat-resistant gloves
when handling hot accessories.
Open the appliance door carefully.
1.
Using the metal hook, pull the rotary spit to the right out of
2.
the motor mount.
Pull the rotary spit shelf halfway out of the oven.
3.
Hold the rotary spit in place on the left-hand side with an oven
4.
glove and screw the handle onto the rotary spit.
Lift the rotary spit carefully out of the rotary spit shelf.
5.
Remove the rotary spit shelf and the baking tray from the
6.
oven.
12

Operating the electronic clock

Setting the time
After the appliance has been connected to the mains for the
first time or after a power cut, three zeros flash in the display.
Press the V button.
1.
Set the current time with the "+" and "-" buttons.
2.
Setting the timer
The timer has no influence on the functions of the oven.
Press and hold the "+" button until the desired time is
1.
displayed.
Release the "+" button.
2.
An audible signal sounds once the time has elapsed.
Notes
The set time can be changed at any time using the "+" and "-"
■
buttons.
If the timer is running, the current time can be shown by
■
pressing the button.
V
Switching off the acoustic signal
Press the "-" button to switch off the acoustic signal.
After seven minutes, the signal switches off automatically.
Changing the audible signal
The acoustic signal can be changed to three levels. To do this,
press the "-" button until the desired signal is set.