Changing the master code
The first digit of a user code must never be identical with the
first digit of the master code! Failure to observe this means
that a complete reset of all codes is necessary see "Error
reset". All programming has to be done again.
Actuate the system by pressing button E on the
key pad. The green LED will flash twice.
Enter the old master code.
Press button P to actuate programming mode.
Enter the new master code with a minimum of 2
and maximum number of 6 digits.
Confirm entry by pressing the button P . This
switches off the programming mode.
Entering the mastercode also opens the door and allows
access to the programming mode.
Example: E 1234 P 4321 P = new mastercode E 4321
Programming of user codes
The system can accept 3 additional codes besides the
master. Each user code is programmed into the system in
one of these programming slots 1P, 2 P or, 3 P.
The first digit of a user code must never be identical with the
first digit of the master code! Failure to observe this means
that a complete reset of all codes is necessary see "Error
reset". All programming has to be done again.
Actuate the system by pressing button E on the
key pad. The green LED will flash twice.
Enter the old master code.
Press button P to actuate programming mode.
To enter the programming slot press either 1P...
Enter the desired code with a maximum of 6 digits.
Press button P and the code is accepted and
programming mode is switched off.
Programming of all the codes is done in the same manor.
Examples: E 4321 P 1 P 78493 P = First usercode E 78493
E 4321 P 2 P
E 4321 P 3 P 7431 P = Third usercode E 7431
Operation of the code lock
(maximum entry time 13 secs.)
Switching-on of operational standby mode by
actuating the key E on the membrane keypad.
Thee green LED indicator will flash on briefly twice, indicating
entry standby.
Entering one of the valid code numbers.
The door handle is released for 3 secs. For the
purpose of actuation (in order to open the door). During the
unlocking period the door handle can be actuated only once.
10
539 P = Second usercode E
2 P...
3 P...
539