habitat et jardin STRONG Mode D'emploi page 13

Step 3:
Attach the leg extension upright (6) to the front stabilizer (5), using carriage bolt M8X50mm (17),
flat washer d8 (23) and nylon nut M8 (26).
Insert the square bushing (39) into the leg extension upright (6) and then insert the leg extension
support (7) into the leg extension upright (6) and then fox with locking knob M8X43 (27) before
adjusting.
Insert the leg extension par bars (9) into the hole of leg extension support (7) and then attach the
foam rollers (40) to the leg extension par bars (9).
Step 4:
Fix the main frame (4) between the
upright support tube (3) and leg
extension upright (6) with hex screw
M10X55mm (51), flat washer d10 (25)
and Nylon nut M10 (29).
Fix the main frame (4) between the
upright support tube (3) and leg
extension upright (6) with carriage bolt
M8X90mm (19), carriage bolt M8X55mm
(18), spring washer d8 (24), flat washer
d8 (23) and knob nut M8 (28).
Attach the seat bracket (12) to the main
frame (4), using carriage bolt M8X50mm
(17), flat washer d8 (23) and nylon nut
M8 (26)
12