habitat et jardin STRONG Mode D'emploi page 12

NOTE:
Most of the listed assembly hardware has been packaged separately, but some
hardware items have been preinstalled in the identified assembly parts. In these
instances, simply remove and reinstall the hardware as assembly is required.
Please reference the individual assembly steps and make note of all preinstalled
hardware.
Assembly Of Weight Bench
NOTE: It is strongly recommended two or more people assembling this machine to
avoid possible injury. REMOVE ALL SECURITY TAPE AND WRAPPING BEFORE
BEGINNING
Step 2:
Attach the upright support tube (3) to the uprights (2), using
carriage bolt M8X50mm (17), flat washer d8 (23) and nylon
nut M8 (26). And then insert the backrest adjustment rod
(10) into the uprights (2).
Step 1:
Fix the uprights (2) on the rear stabilizer (1) with carriage
bolt M8X85mm (53), flat washer d8 (23) and nylon nut M8
(26).
Fix the stabilizer brackets (13) between uprights (2) and
rear stabilizer (1) with carriage bolt M8X45mm (54),
carriage bolt M8X50mm (17), flat washer d8 (23) and nylon
nut M8 (26).
11