EIBENSTOCK EPF 1503 Notice Originale page 13

Technical Data
Scouring Machine EPF 1503
Rated voltage:
Power input:
Rated current:
Order number:
Frequency:
Rated speed:
Max. milling head diameter:
Collet:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Scouring Machine with milling head, Allen key and operating instructions in
a metal case
Application for Indented Purpose
The Scouring Machine EPF 1503 is indented for professional use.
With its milling head, the tool is intended to be used to remove loose
plaster, glue and old paints (e.g. graffiti) in combination with an industrial
vacuum cleaner (category M).
It is not allowed to work on concrete surfaces.
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction completely and follow the
instructions contained strictly. Additionally, the general
safety instructions of the leaflet supplied with the tool
must be observed. Prior to the first use, the user should
absolve a practical training. Save all warnings and
instructions for future reference.
If the mains cable gets damaged or cut during the use, do not
touch it, but instantly pull the plug out of the socket. Never use
the tool with damaged mains cable.
Supply
230 V ~
1500 W
6.8 A
0651I000
50 / 60 Hz
4000 rpm
140 mm
M14, male thread
II
IP 20
approx. 3,9 kg
EN 55014 and EN 61000
13
110 V ~
1500 W
13.5 A
0651J000