Exit Contour Safetynet Mode D'emploi page 12

Step 8
A
Insert one assembled Cable (6) wire
into sleeve on the top of the enclo-
Insert one assembled Cable wire(10)
sure net (4) as shown A.
e on the top of the enclosure
Insert one assembled top Cable wire
Notice: Two adults are required
when assemble.
Insert the second assembled Cable
Notice: Two adults are required
wire (6) into sleeve on the top of the
enclosure net by the same manner.
B
Attach two ends of the entire Cable
wire together as shown B.
ttach two ends of the entire Cable
Notice: Put the net on the inside
of the poles on the frame pad.
Now go stand on the jumpmat.
Place the Cable Wire with enclsoure
to the plastic cap. Make sure the ca-
Notice: Put the net on the inside
ble wire fit into the slot properly.
Repeat for all the cable wire and
plastic cap.
Place the Cable Wire with enclosure
Make sure the center of the enclosure
doos and center of the two legs are
aligned.
e sure the center of the enclosure
e sure the center of the enclosure
ance and center of the two legs
12
8
op Ca-
e on the top of the
-
A
8
A
6
4
6
4
B
B
8 ft
6
6
10 ft , 12ft, 14 ft