Hands Free Mode - Geemarc AmpliDECT250T Notice D'utilisation

Using the Phone
To end the call simply press
Pre-dialing: Pick up handset. Dial the number on the keypad, press
number is automatically dialled.
To end the call simply press
Note:
If you make an incorrect entry while pre-dialling the telephone number:
- Press C to clear the last digit and then enter the correct number
- Press C for longer than one second to clear all digits entered and return to
standby mode.
If you wish to insert a pause when storing a number, press

5 - Hands free mode

This function is used when you don't want to have the handset near your ear or when you want other
people to hear at the same time.
When you are in conversation Press and hold
volume 1 to 4.
To release hands free mode, do the same as above.
again or place the handset on the base
again or place the handset on the base.
until
13
the
until P appears in the LCD display.
displays, use ▲and▼to adjust the