Instructions For Use - Heraeus Signum metal bond Mode D'emploi

Instructions for use

Signum metal bond
Signum metal bond I+II is a metal resin bonding system for crown, bridge and CrCo frame-
work.
Composition:
Inorganic pigments, SiO (silanised), methyl methacrylate, acetone, bifunctional methacrylate-
2
based components
Indication:
• Bonding methacrylate based resins / composites to metal framework surfaces in conjunc-
tion with macromechanical retention
• Bonding methacrylate based resins / composites to CrCo framework surfaces
• Bonding agent for repairing composite facings (intraoral and extraoral)
• Bonding agent for repairing porcelain bonded restorations
• Bonding between root posts, Maryland bridges and composite cement
Technique
Sandblast the surface to be faced with min. 110 μm Al O at 3 bar pressure (non-recyclable
2 3
abrasive). Then clean with uncontaminated (oil free) compressed air or clean tap water (do not
steam clean) and dry thoroughly.
6