How To Use; Safety Feature; Using Uv Test Paper; Charging The Battery - Munchkin 59S MKCL0730-01 Notice D'utilisation

How to Use

SAFETY FEATURE

If lid is opened during use, UVC light will automatically turn off to protect skin and
eyes from UV exposure.

USING UV TEST PAPER

To confirm device is working properly, simply place UV test paper into steriliser with
the large "Munchkin | 59S" facing up. Then press the "59S" indicator light to begin
sterilising cycle.
If UV is working, the lettering on the test paper will become more prominent.
Lettering will return to normal after one minute.
Please discard UV test paper after testing.

CHARGING THE BATTERY

The unit is powered by its own built-in battery. Plug to power source via USB cable
to recharge.
Insert USB cable into:
• USB computer port
• Electrical outlet using a USB power adapter (not included)
Input power: 5VDC, 400mA (min)
10
HOW TO USE
1. Charge the device fully prior to first time use.
2. Wash soother or wipe clean to remove debris before sterilisation. Place soother
(teat side up) into unit, then close lid. Do not insert more than one soother at
a time.
NOTE: This device disinfects surfaces exposed to UVC light. Soother must have
unobstructed access to UVC light.
3. Press the power button and wait for 59 seconds. When disinfecting is finished,
power button will stop blinking and turn off by itself.
4. Open lid and remove soother. The unit is now ready to disinfect another soother.
5. If charging indication light next to the micro-USB port is blinking red, the unit
needs to be recharged.
6. When fully recharged, the charging indication light will be solid white until the
charging plug is removed.
How to Use
11