Indicator Light Chart; How To Use - Munchkin I 59S Notice D'utilisation

How to Use

INDICATOR LIGHT CHART

INDICATOR LIGHT
Solid light
Blinking light
Solid light
No light
NOTE: In "ready" mode, indicator light will turn off after five minutes of inactivity and
unit will resume sleep.
HOW TO USE
1. Wash soother or wipe clean to
remove debris before sterilisation.
Place soother (teat side up) into
unit, then close lid. Do not insert
more than one soother at a time.
2. If indicator light is off, press power
button to wake unit. Light will turn
on to indicate unit is ready.
3. Press power button again to begin
disinfecting. Indicator light will
blink until process is complete
(59 seconds).
4. When disinfecting is finished,
indicator light will stop blinking
and stay solid again. Open lid and
remove soother. The unit is now
ready to disinfect another soother.
NOTE: This device disinfects surfaces exposed to UVC light. Soother must have
unobstructed access to UVC light.
10
MODE
Ready
Disinfecting in progress
Disinfecting complete / ready
Sleeping
Press once to wake
Press again to start
disinfecting