How To Use; Included Parts; Using The Sterilizer - Munchkin Clean MKCL0573 Notice D'utilisation

How to Use

INCLUDED PARTS

TIP: The tongs fi t into the accessory
tray for storage and also for
sterilization.
8
LID WITH HANDLE
TONGS
ACCESSORY TRAY
BIN
BASE
Storage Sterilization

USING THE STERILIZER

Before fi rst use, please follow the directions below to run the sterilizer once while empty.
1. Use a clean baby bottle to measure 4oz / 120ml of
distilled water.
Pour this water into the center of the sterilizer base up to
the fi ll line. Do not overfi ll. Avoid splashing water over
the sides.
2. Place the bin onto the sterilizer base. Wash bottles and
accessories thoroughly in warm soapy water and rinse
before placing them in the sterilizer.
Arrange bottles upside down. The bin can hold up to 6
wide-mouth bottles or up to 9 standard bottles.
3. Use the accessory tray if sterilizing shorter, wide-mouth
bottles. Place the accessory tray above the bottles.
TIP: Stack accessories on the tray
in this order to optimize space.
4. If using taller, standard-sized bottles, place nipples and
accessories into the bin along with the bottles.
TIP: If not needed, turn the access-
ory tray upside down and attach to the
underside of the lid.
How to Use
1
2
3
4
9