Zwilling ENFINIGY 53103-7 Manuel D'utilisation page 33

EN
Malfunctions
Problem/error code
The milling mechanism is
not working.
The lighting is not working. The lamp is defective.
The device is not working.
www.zwilling.com
Possible cause
The grind is set too fine.
The milling mechanism is
obstructed.
The device is not charged.
Malfunctions
Remedy
Adjust for a coarser grind.
Clean the milling mechanism.
Contact your retailer or Custo-
mer Service.
Use the supplied charging
cable to charge the device.
33