Delayed Start; Starting The Programme; Child Lock - Beko WTE 7502 B0S Manuel D'utilisation

4.10 Auxiliary function selection
Select the desired auxiliary functions before starting
the programme. Furthermore, you may also select or
cancel auxiliary functions that are suitable to the running
programme without pressing the Start / Pause button when
the machine is operating. For this, the machine must be in
a step before the auxiliary function you are going to select
or cancel.
If the auxiliary function cannot be selected or canceled, light
of the relevant auxiliary function will blink 3 times to warn
the user.
C
Some functions cannot be selected together. If a
second auxiliary function conflicting with the first one
is selected before starting the machine, the function
selected first will be canceled and the second auxiliary
function selection will remain active. For example, if you
want to select Quick Wash after you have selected the
Prewash, Prewash will be canceled and Quick Wash
will remain active.
An auxiliary function that is not compatible with the
programme cannot be selected. (See "Programme and
consumption table")
Auxiliary Function buttons may vary according to the
model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
C
Prewash without detergent is recommended for tulle
and curtains.
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
• Extra Rinse
This function enables the machine to make another rinsing
in addition to the one already made after the main wash.
Thus, the risk for sensitive skins (babies, allergic skins, etc.)
to be effected by the minimal detergent remnants on the
laundry can be reduced.

Delayed Start

With the Delayed Start function the startup of the
programme may be delayed up to 19 hours. Delayed start
time can be increased by increments of 1 hour.
C
Do not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
Open the loading door, place the laundry and put detergent,
etc. Select the washing programme, temperature, spin
speed and, if required, the auxiliary functions. Set the
14 / EN
desired time by pressing the Delayed Start button. Press
Start / Pause button. The delayed start time you have set is
displayed. Delayed start countdown starts. "_" symbol next
to the delayed start time moves up and down on the display.
C
Additional laundry may be loaded during the delayed
start period.
At the end of the countdown, duration of the selected
programme will be displayed. "_" symbol will disappear and
the selected programme will start.
Changing the Delayed Start period
If you want to change the time during countdown:
Press Delayed Start button. Time will increase by 1 hour
each time you press the button. If you want to decrease the
delayed start time, press Delayed Start button repeatedly
until the desired delayed start time appears on the display.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start
the programme immediately:
Set the Delayed Start period to zero or turn the Programme
Selection knob to any programme. Thus, Delayed Start
function will be canceled. The End/Cancel light flashes
continuously. Then, select the programme you want to run
again. Press Start / Pause button to start the programme.

4.11 Starting the programme

Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of the
programme will turn on.
C
If no programme is started or no key is pressed within
1 minute during programme selection process, the
machine will switch to Pause mode and the illumination
level of the temperature, speed and loading door
indicator lights will decrease. Other indicator lights and
indicators will turn off. Once the Programme Selection
knob is rotated or any button is pressed, indicator lights
and indicators will turn on again.

4.12 Child Lock

Use Child Lock function to prevent children from tampering
with the machine. Thus you can avoid any changes in a
running programme.
C
If the Programme Selection knob is turned when the
Child Lock is active, "Con" appears on the display.
The Child Lock does not allow any change in the
programmes and the selected temperature, speed and
auxiliary functions.
Even if another programme is selected with the
Programme Selection knob while the Child Lock is
active, previously selected programme will continue
running.
To activate the Child Lock:
Press and hold 1 and 2 Auxiliary Function buttons for
st nd
3 seconds. The lights on the 1
buttons will flash, and "C03", "C02", "C01" will appear on
the display respectively while you keep the buttons pressed
for 3 seconds. Then, "Con" will appear on the display
indicating that the Child Lock is activated. If you press any
button or turn the Programme Selection knob when the Child
Lock is active, same phrase will appear on the display. The
lights on the 1st and 2nd auxiliary function buttons that are
used to deactivate the Child Lock will blink 3 times.
and 2 Auxiliary Function
st nd
Washing Machine / User's Manual