Hoover 48019772/01 Manuel D'utilisation page 6

Important Safety Instructions
surface on which the stand is placed is stable.
• The plug must be removed from the socket-outlet
before the water reservoir is filled with water.
• The surfaces with
use.
• To have a electronic copy of the instruction manual
contact the after sales service in guarantee card.
• The iron must be used and rested on a stable surface.
Chapter 1: Preparation for Use
Due to the powerful output of steam, Hoover recommends the use of an active ironing board with blowing
and vacuuming function which allows escape of any excess steam.
Place the ironing system on a stable and level surface, for example on the hard part of an ironing board or
on a heat-resistant surface.
Chapter 1.1: What Kind of Water May be Used?
The Hoover ironing system has been designed to be used with tap water only.
There is no need to use distilled or pure distilled water.
Nevertheless, in case you live in a hard water area, you can mix 50% of distilled water with 50% of tap water.
Do not use any other kind of water or do not add any contents to water tank as it can damage your appliance.
Chapter 1.2 : Filling the Water Tank
Switch off the appliance and unplug it.
Open the water tank cover (5) to gain access to the water tank.
Fill it with tap water with the help of a bottle.
Do not exceed the max mark.
WARNING: Do not add vinegar, hot water, perfume, or any other kind of chemical agents or any other
contents in the water tank. It could damage the steam generator and shorten its life use.
4
GB
are liable to get hot during
Fig. 5: Water Tank Filling