Sony TDM-BT10 Mode D'emploi page 2

WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus
to rain or moisture.
The unit is not disconnected from
the AC power source (mains) as
long as the connected AV system is
connected to the wall outlet.
The nameplate is located on the
bottom exterior.
Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
To prevent fire or shock hazard, do
not place objects filled with liquids,
such as vases, on the apparatus.
Install this system so that the power
cord can be unplugged from the wall
socket immediately in the event of
trouble.
Notice for customers: the
following information is only
applicable to equipment sold in
countries applying EU directives
The manufacturer of this product
is Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075 Japan.
The Authorized Representative for
EMC and product safety is Sony
Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters
please refer to the addresses given
in separate service or guarantee
documents.

GB
For the customers in Europe
Hereby, Sony Corporation declares
that this TDM-BT10 Bluetooth
Wireless Audio Adapter is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/
EC. For details, please access the
following URL:
http://www.compliance.sony.de/
Use of this radio equipment is not
allowed in the geographical area
within a radius of 20 km from the
centre of Ny-Alesund, Svalbard in
Norway.
The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony
Corporation is under license.
Other trademarks and trade names
are those of their respective owners.
