Troubleshooting; Distorted Sound - Sony TDM-BT10 Mode D'emploi

Adaptateur audio sans fil bluetooth
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21

Troubleshooting

If you run into any problems using this unit, use the following checklist.
Should any problem persist, consult your nearest Sony dealer.
No sound
 Check the connection between
this unit and the AV system.
 Check that both this unit and the
Bluetooth audio source device are
turned on.
 Ensure that this unit is not too
far from the Bluetooth audio
source device, or this unit is
not receiving interference from
a wireless LAN, other 2.4 GHz
wireless device, or microwave
oven.
 Check that the Bluetooth
connection is established
properly between this unit and
the Bluetooth audio source
device.
 Turn up the volume of the AV
system.
 Turn up the volume of the
Bluetooth audio source device
as high as possible to the extent
that sound is not distorted. For
details on volume adjustment,
refer to the operating instructions
supplied with the Bluetooth audio
source device.
 Pair this unit and the Bluetooth
audio source device again.
 Check that music is being played
on the Bluetooth audio source
device.
16
GB
Low sound level
 Turn up the volume of the
Bluetooth audio source device
as high as possible to the extent
that sound is not distorted. For
details on volume adjustment,
refer to the operating instructions
supplied with the Bluetooth audio
source device.
 Turn up the volume of the AV
system.

Distorted sound

 Turn off the bass boost function
or equalizer function of the
Bluetooth audio source device.
 Turn down the volume of the
Bluetooth audio source device
to the point where the sound is
no longer distorted. For details,
refer to the operating instructions
supplied with the Bluetooth audio
source device.

Publicité

Table des Matières
loading

Table des Matières