Pairing The Remote Control; Software Update - Parrot Zikmu Solo Guide D'utilisation Rapide

Pairing the remote control

If the Parrot Zikmu Solo remote control does not seem to work :
1. Make sure the battery is correctly installed (diagram p.4).
2. Restart the Parrot Zikmu Solo.
3. Press the SOURCE
perform this action once the Parrot Zikmu Solo is turned on.

Software update

Make sure you have the latest software update on your Parrot Zikmu Solo. Using
the Web interface you can easily identify whether a new software update is
available. If you require an update 'click' to download and install the latest version.
You can also check the software version displayed information if you have an iPod.
To do so, install the iPod on the Parrot Zikmu Solo, then select
Information if you have an iPhone or
Browse through the displayed informations until "Parrot Zikmu Solo by Starck" is
displayed.
and buttons simultaneously. You have one minute to
Settings > Information
Settings > General >
if you have an iPod.
English 25