Parrot Zikmu Solo Guide D'utilisation Rapide page 16

Connection with WPS
If your modem / router supports the WPS technology:
1. Press the WPS button on your modem / router. Refer to the documentation of
your device for more information.
2. Press the
> The green light located next to this button blinks. It remains steady once the
connection is established.
Connection with an RJ45 cable
Note : The RJ45 cable, also called ethernet cable, is not provided with the Parrot
Zikmu Solo.
1. Connect your computer to the Parrot Zikmu Solo using an RJ45 cable (diagram
p.8).
2. On your computer, launch your web browser and enter http://zikmu-solo.local/
wifi in the address bar.
> The list of available Wi-Fi networks will be displayed.
3. Select your Wi-Fi network.
4. Enter the WEP / WPA / WPA2 key if necessary then click on Apply.
16 English
button on the Parrot Zikmu Solo located behind the grid.