Parrot Zikmu Solo Guide D'utilisation Rapide page 18

2. Join the "SoloNet-xx.xx" Wi-Fi network (as if you were trying to establish a
connection with a router / modem).
Note : You will temporarily lose your Internet access. You can reconnect your
computer to your Wi-Fi network at the end of this procedure.
3. Launch your web browser on your computer or Smartphone and enter http://
zikmu-solo.local (or http://[new-name].local if you changed the speaker
name) in the address bar.
4. Click on Wi-Fi
> The list of available Wi-Fi networks is displayed.
5. Select your Wi-Fi network.
6. Enter the WEP / WPA / WPA2 if necessary then click on Apply.
Using the web interface
The Parrot Zikmu Solo web interface allows you to control the playback of your
audio files and modify several audio settings. You can access this interface from
your computer, Smartphone or tablet.
1. Connect the Parrot Zikmu Solo to your Wi-Fi network using one of the
previously described methods.
2. On your computer or Smartphone, launch your web browser.
3. Enter http://zikmu-solo.local (or http://[new-name].local if you changed the
18 English
Configuration.