Description Of Footbath - Beurer FB 20 Mode D'emploi

Make sure that the plug and the power cord do not come into contact with water or other liq-
uids.
For this reason, the device must be operated as follows:
only in dry inside rooms (e.g. never in the bathtub or sauna),
only with dry hands.
Never immerse the device in water. Never try to retrieve the device if it falls into water. Discon-
nect the plug immediately from the mains outlet.
Fire hazard
WARNING
There is a risk of fire if the device is used incorrectly or if it is not used according to these op-
erating instructions.
For this reason, the massage device must only be operated as follows:
Never leave the device unsupervised, particularly if children are around.
Never use the device under covers, such as blankets or pillows.
Never use the device in the vicinity of petrol or other easily flammable materials.
Handling
CAUTION
Switch the device off and disconnect the power supply after every use and before every
cleaning.
Keep the device away from high temperatures.
Never stand in the foot bath.
The device must not be connected to the power supply while being filled.
Always switch the foot bath off and remove the plug from the mains socket before moving it
or cleaning it.

4. Description of footbath

1
8
2
5
6
a
7
b
c
10
1. Splash protection
2. Rotary switch
3. Water level mark
4. Bubble strip
3
5. Massage attachment
6. Removable pedicure attachments
a Corn and callous remover
b Brush
c Massage attachment
4
7. Rubber feet (bottom side)
8. Foot rest with massage naps
9. Cord winder (bottom of device)
9