Aux Mode - Krüger & Matz DISCOVERY XL Mode D'emploi

Note:
• If pairing is not completed within 3 minutes, the speaker will quit the pairing mode. In
that case, repeat pairing process to pair the speaker with external device.
• Every time the speaker is switched on, it will connect to last connected device
automatically. please note, your device must be on with Bluetooth function turned on.

auX Mode

1. Use 3,5 mm AUX cable and connect one end of the cable into the speaker's 3,5 mm input.
2. The speaker will automatically enter AUX mode. AUX Indicator will light.
3. Connect the other end into the 3,5 mm input of the device you wish to play music from.
4. Start playing music from your device.
MicroSd Mode
1. Insert microSD card into the slot.
2. The speaker will automatically enter microSD mode. MicroSD Indicator will light.
3. Start playing music from your microSD card.
Note: While microSD card is inserted into microSD card slot in the speaker, connect
one end of microUSB charging cable to the microUSB port of the speaker, then connect
the other end to compatible pC USB port to transfer music files from the computer to
microSD card.
10
nFc
1. Make sure the speaker is turned on.
2. enable NFC function on the external device you are going to connect to.
3. Bring the external device close to the NFC area of the speaker. The devices will connect
automatically.
charging
1. Connect one end of microUSB charging cable
into speaker microUSB port. Connect the other
end into USB adapter and then connect it to
the power supply socket.
2. Lights in the chart below indicate the speaker's
remaining charge level:
Notes:
• please be sure the battery has been charged
fully before first use.
• Charging continues even if the speaker is
turned off.
• If the speaker is idle for around 40 minutes, it will automatically turn off to save battery.
• A speaker battery indicator will be displayed when connected to iOS devices.
• It is also possible to charge external devices with the USB port. Firstly, make sure the
speaker is turned on. Then connect one end of the USB charging cable to the USB port
of the speaker and then connect the other end into the USB port of the device you are
going to charge.
Owner's manual
100% battery
60% battery
30% battery
Low battery