Bluetooth Mode; Aux Mode - Krüger & Matz EXECUTIVE Mode D'emploi

Music Play/Pause:
While playing music, press button
Volume adjustment:
press + button to increase volume. press – button to decrease volume.
Music selection:
press button to go to the next track. press

bluetooth Mode

Pairing:
1. Make sure the speaker is turned on.
2. please keep the speaker and external device close to each other when pairing.
3. press and hold the Bluetooth button to enter pairing mode. The speaker will issue a
voice prompt.
4. Enable the Bluetooth function on the external device and search for new Bluetooth
devices.
5. Select and connect with this device (KM Executive). Enter password: "0000" if necessary.
6. The speaker will issue a sound signifying successful pairing.
Notes:
• If pairing is not completed within 3 minutes, the speaker will quit the pairing mode. In
that case, repeat pairing process to pair the speaker with external device.
• Every time the speaker is switched on, it will connect to last connected device
automatically. please note, your device must be on with Bluetooth function turned on.
8
to play/pause music playback.
button to go to the previous track.

auX Mode

AUX input:
1. Use 3,5 mm AUX cable and connect one end of the cable into the speaker's 3,5 mm input.
2. The speaker will automatically enter AUX mode.
3. Connect the other end into the 3,5 mm input of the device you wish to play music from.
4. Start playing music from your device.
AUX output:
1. When paired with an external device, insert the 3,5 mm headset jack into 3,5 mm AUX
output (headphones) of the speaker.
2. The speaker will automatically enter AUX mode.
3. Start playing music through your headphones.
nFc
1. Make sure the speaker is turned on.
2. Enable NFC function on the external device you are going to connect to.
3. Bring the external device close to the NFC area of the speaker. The devices will connect
automatically.
charging
1. Connect one end of the charging cord into the charging port of the speaker.
2. plug the power adapter into the socket.
3. Lights in the chart below indicate the speaker's remaining charge level:
Owner's manual