Aux Mode; Charging External Devices - Krüger & Matz Solo XL Mode D'emploi

Owner's manual
When a call is ended, the speaker will automatically switch to music
playback.

AUX MODE

1. Use the included 3,5 mm jack cable and connect one plug of the cable to
the speaker's AUX input. The speaker will switch to AUX mode automatically
and the blue LED indicator will be on.
2. Connect the other plug into the 3,5 mm output of the external device you
wish to play music from.
3. Start playing music from your device.
Note: Track selection is controlled by the external device when in AUX mode.
NFC
1. Make sure the speaker is turned on.
2. Enable NFC function on external device you are going to connect to.
3. Bring the external device close to the NFC area of the speaker. The devices
will connect automatically.

CHARGING EXTERNAL DEVICES

1. Make sure the speaker is turned on.
2. Use a USB cable and connect one plug to the speaker's USB output; then
connect the other plug to the external device's input.
3. Charging starts automatically.
CHARGING
1. Use the included USB cable and insert one plug to the speaker's
microUSB port; connect the other plug to the compatible PC USB port
or AC charger.
2. When the speaker is charging, red LED indicator is on.
3. When the speaker is fully charged, LED indicator goes off.
Notes:
• Please be sure the battery has been charged fully before first use.
• Charging continues even if the speaker is turned off.
13