Listening In Stereo; Using Front Stage Surround Advance - Pioneer VSX-520-S Mode D'emploi

05 Listening to your system
• EXT.STEREO – Gives multichannel sound
to a stereo source, using all of your
speakers.

Listening in stereo

When you select STEREO you will hear the
source through just the front left and right
speakers (and possibly your subwoofer
depending on your speaker settings). Dolby
Digital and DTS multichannel sources are
downmixed to stereo.
In the Auto level control stereo mode (ALC),
this unit equalizes playback sound levels if
each sound level varies with the music source
recorded in a portable audio player.
AUTO/
DIRECT
• While listening to a source, press
STEREO/A.L.C. for stereo playback.
Press repeatedly to switch between:
• STEREO – The audio is heard with your
surround settings and you can still use the
Midnight, Loudness, Phase Control, Sound
Retriever and Tone functions.
• ALC – Listening in Auto level control stereo
mode.
• F.S.S.ADVANCE – See Using Front Stage
Surround Advance below for more on this.
32
En
BD MENU
STEREO/
A.L.C. STANDARD ADV SURR
Using Front Stage Surround
Advance
The Front Stage Surround Advance function
allows you to create natural surround sound
effects using just the front speakers and the
subwoofer.
AUTO/ STEREO/
DIRECT A.L.C.
• While listening to a source, press STEREO/
A.L.C. to select Front Stage Surround Advance
modes.
• STEREO – See Listening in stereo above for
more on this.
• ALC – See Listening in stereo above for
more on this.
• F.S.S.ADVANCE – Use to provide a rich
surround sound effect directed to the
center of where the front left and right
speakers sound projection area converges.
F.S.S.ADVANCE position
Front left
speaker
BD MENU
STANDARD ADV SURR
Front right
speaker