Technical Data - AEG EWA 30 Série Mode D'emploi

822_949_303 EWA3000_3030.book Seite 10 Freitag, 10. August 2007 1:03 13
g
What to do if ...
• the appliance switches off before
boiling?
– The base of the kettle is too thickly
scaled. Treat with standard commer-
cial descaling agent suitable for
stainless steel. Note the directions
for use from the manufacturer.
• the appliance does not switch off?
– Close lid until it locks.
– Insert the strainer correctly.
• the kettle pours badly?
– Descale the strainer insert.
• the appliance cannot be switched on?
– after operating with very little or no
water, the appliance has not yet
cooled sufficiently.
Wait a short time before trying
again.
10

Technical data

Mains voltage:
Power drain:
Max. filling volume:
This appliance conforms with the fol-
;
lowing EC Directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 89/336/EEC with
amendments 92/31/EEC and
93/68/EEC
220 - 240 V/50 Hz
1850 - 2200 W
1,75 litres