Mitsubishi Electric Mr.SLIM PKA-RP HAL Série Manuel D'utilisation page 9

2. Press the Timer Menu button
screen (at ). (Note that each press of the button toggles the display
between "Set Up" and "Monitor".)
3. Press the Timer On/Off (Set Day) button
advances the display at to the next setting, in the following se-
4. Press the or Operation button (
the appropriate operation number (1 to 8)
* Your inputs at Steps 3 and 4 will select one of the cells from the ma-
trix illustrated below.
(The remote-controller display at left shows how the display would
appear when setting Operation 1 for Sunday to the values indicated
below.)
Op No. Sunday Monday
• 8:30
No. 1 • ON
• 23 °C
• 10:00 • 10:00
No. 2
• OFF • OFF
...
No. 8
<Operation 1 settings for Sunday>
Start the air conditioner at 8:30, with
the temperature set to 23 °C.
Note:
Shows the time Shows the selected operation (ON or OFF)
setting * Does not appear if operation is not set.
SUN
ON
C
WEEKLY
5. Press the appropriate Set Time button
sired time (at ).
tervals, then in 10-minute intervals, and then in 1-hour intervals.
6. Press the ON/OFF button
OFF), at .
* Each press changes the next setting, in the following sequence: No
7. Press the appropriate Set Temperature button
temperature (at ).
* Each press changes the setting, in the following sequence: No dis-
play (no setting) 24 25
No display.
(Available range: The range for the setting is 12 °C to 30 °C. The
actual range over which the temperature can be controlled, how-
ever, will vary according to the type of the connected unit.)
8. After making the appropriate settings at Steps 5, 6 and 7, press the
Filter button to lock in the values.
To clear the currently set values for the selected operation, press and
quickly release the Check (Clear) button
* The displayed time setting will change to "—:—", and the On/Off
and temperature settings will all disappear.
(To clear all weekly timer settings at once, hold down the Check
(Clear) button for 2 seconds or more. The display will begin blink-
ing, indicating that all settings have been cleared.)
Note:
as you wish.
10.Press the mode (Return) button
screen and complete the setting procedure.
11.To activate the timer, press the Timer On/Off button
"Timer Off" indication disappears from the screen. Be sure that the
* If there are no timer settings, the "Timer Off" indication will blink on
the screen.
, so that the "Set Up" appears on the
to set the day. Each press
or ) as necessary to select
.
... Saturday
• 10:00 • 10:00
• OFF • OFF
<Operation 2 settings for every day>
Turn off the air conditioner at 10:00.
Shows the temperature setting
* Does not appear if temperature
is not set.
as necessary to set the de-
to select the desired operation (ON or
to set the desired
... 29 30 12 ...
once.
n
.
to return to the standard control
, so that the
8
SUN
TIMER
1. Be sure that the weekly timer indicator is visible on the screen (at
2. Press the Timer Menu button
screen (at ).
3. Press the Timer On/Off (Set Day) button
day you wish to view.
4. Press the or Operation button (
the timer operation shown on the display (at
* Each press will advance to the next timer operation, in order of time
setting.
5. To close the monitor and return to the standard control screen, press
the Mode (Return) button
Press the Timer On/Off button
10
Press the Timer On/Off button
goes dark.
C
10
You can set the simple timer in any of 3 ways.
• Start time only:
The air conditioner starts when the set time has elapsed.
• Stop time only:
-
The air conditioner stops when the set time has elapsed.
• Start & stop times:
The air conditioner starts and stops at the respective elapsed times.
The simple timer (start and stop) can be set only once within a 72-hour
period.
The time setting is made in hour increments.
Note:
23
is in effect.
BACK MONITOR/SET
PAR-21MAA
Timer Settings
9
ON
OFF
C
1
WEEKLY
so that "Monitor" is indicated on the
as necessary to select the
or ) as necessary to change
).
.
so that "Timer Off" appears at
TIME SUN
C
C
WEEKLY
so that the "Timer Off" indication (at
TIME SUN
C
WEEKLY
Hr ON
AFTER
SIMPLE
TEMP. ON/OFF
MENU ON/OFF
FILTER
DAY
CHECK TEST
CLOCK OPERATION
CLEAR
).
.
10
)
10
-
-
9