Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cutout Height is between 26¹⁵⁄₁₆" (68.4 cm) and
27¹¹⁄₁₆" (70.3 cm)
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Remove the foot from the right front spacer by removing the
#8-18 x ³⁄₈" screw.
NOTE: Do not remove the spacer.
A. Spacer
B. Foot
C. #8-18 x
3. In the same manner, remove the feet on the right rear, left
front, and left rear of the oven.
4. Using 2 or more people, place the oven in its upright position.
5. Go to the "Make Electrical Connection" section.
A
B
C
³⁄₈
" screw
Cutout Height is between 28¹¹⁄₁₆" (72.8 cm) and
29⁷⁄₁₆" (74.8 cm)
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Remove the foot from the right front spacer by removing the
#8-18 x ³⁄₈" screw.
NOTE: Do not remove the spacer.
A. Spacer
B. Foot
C. #8-18 x
3. Rotate the foot 90° so the short side of the foot is positioned
toward the top of the oven.
4. Reinstall the foot to the spacer using the #8-18 x ³⁄₈" screw
previously removed.
5. In the same manner, remove, rotate and reinstall the feet on
the right rear, left front, and left rear of the oven.
A
B
C
³⁄₈
" screw
7
Publicité
Table des Matières
