Troubleshooting; Cleaning, Care And Maintenance - Cartrend 80320 Mode D'emploi

tROuBleshOOtInG

Problem
Water stream has
inadequate pressure.
no water stream.
unit isn't
working.

cleanInG, caRe anD MaIntenance

• carefully wind the cable when storing the device. this will help prevent accidental dama-
ge to the cable and the device.
• clean the product with a soft, dry cloth.
• store the machine in a clean, dry place.
• Be sure there is no water in the unit or the hose. allow the reservoir to dry and hang up
the hose to allow the residual water to drain.
cleaning/replacing the suction valve
Only have the suction valve inside the water reservoir cleaned or replaced by qualifi ed
professionals. Please consult your speciality retailer.
changing the fuse inside the 12 v car power plug
1. unscrew the retaining pin (1) with the fuse cover
(2) from the car plug (4).
2. Insert a new micro-fuse (3) of the same rating (see
technical Data).
3. 3. Replace the retaining pin (1) with the fuse cover
(2) in the car plug (4).
24
Possible cause
air in the system.
hose connected incorrectly.
clogged nozzle.
unit is connected incor-
rectly.
correction
hold the lever for 30 sec. until you
have a steady pressurised water
jet.
note: to conserve water you can
return the water to the reservoir.
Open the cover (1) to do so.
check the hose connection.
Remove the nozzle (see "atta-
ching/changing the attachment")
and clean under running water, if
necessary remove dirt from the
opening with a suitable tool (e.g.
wooden pin)
check the connections.
check the fuse in the 12 v car
power plug.
4
Mobile cleaning station
2
3
1