Technical Data - Cartrend 80320 Mode D'emploi

adjusting the water stream
attention!
turn the nozzle max. 2 turns clockwise, otherwise the
nozzle will come off.
the water flow can be regulated variably by the nozzle.
to do so, turn the nozzle clockwise and back.
switching off
1. set the switch (6) to the OFF position.
2. hold the lever on position 2 (see "cleaning") for a few sec-
onds until the water stops.
3. Disconnect the 12 v car power plug (8) from the 12 v car
power socket.
4. Disconnect the 12 v plug (9) from the 12 v connection so-
cket (4).
5. Disconnect the hose (13) from the device. slightly pull back
the hose coupling to do so.

technIcal Data

Dimensions
Weight
voltage
Power
Pressure
Water reservoir
volume
hose length
car connection cable length
storage temperature
Fuse
GB Instructions for use
41,5 x 23,5 x 37,5 cm
5,8 kg
12 v Dc / 6 a
60 W
3 - 9 Bar
15 l
45 dB
6 m
3 m
0 ºc to +40 ºc
8 a
23