Cartrend 80320 Mode D'emploi page 21

attaching/changing the attachment
caution!
verify the unit is switched off before changing the attachment (switch set to OFF position).
select an attachment (14, 15 or 16) and attach it to the spray gun (11).
to remove or change, pull the attachment off the spray gun.
shower attachment (14)
nozzle attachment (15)
connecting the spray gun
connect the spray gun (11) to the hose (13).
1. slightly pull back on the connector to do
so
2. attach the hose coupling (12) to the hose
connector on the spray gun.
3. Release the hose coupling. Be sure the
coupling locks in.
switching on
caution!
• hold the spray gun firmly in your hand to counteract
reactive forces. the water is pressurised.
• Do not press the lever on the spray gun!
1. Plug the 12 v plug (9) into the 12 v connection socket
(4).
2. Plug the 12 v car power plug (8) into a 12 v car socket.
3. set the switch (6) to the On position.
GB Instructions for use
Brush attachment
(16)
21