Maintenance; Maintenance Plan - Zipper Maschinen ZI-KS210 Mode D'emploi

15

MAINTENANCE

Perform all maintenance machine settings with the machine being
disconnected from the power supply!
Serious injury due to unintentional or automatic activation of the
machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Before first operation as well as later on every 100 operation hours you should lubricate all connecting
parts (if required, remove beforehand with a brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
The good condition and perfect adjustment is essential for a smooth and a clean cut.
Store the machine in a closed, dry location.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!

15.1 Maintenance plan

Loose or lost screws
Damage of any part
Saw blade condition
Clean machine
Empty dust bag
Sharpen saw blade
Change saw blade
Change carbon brush
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-KS210
A T T E N T I O N
N O T I C E
Prior to every operation
Prior to every operation
Prior to every operation
After every operation
After every operation
When necessary
When worn or defect
When carbon brush is worn ( < 4mm )
MAINTENANCE
30