Security Instructions - Zipper Maschinen ZI-KS210 Mode D'emploi

12.3 Security instructions

Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator
and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
 Read the manual carefully and get familiar with all components before operating the
machine for the first time.
 This manual contains important information for correct operation of the machine.
 This manual is part of the machine and shall be stored for later reference. Add this
manual to the machine if handed to 3rd persons for use.
 Stick to these Security Warnings and Instructions to reduce the risk of serious injuries.
 Assure that the working area is sufficiently lighted!
 Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
slippery floor.
 Do not overload the machine
 Provide good stability and keep balance all times
 Avoid abnormal working postures! Make sure you stand squarely and keep balance at
all times.
 Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden.
 The plug of an electrical tool must strictly correspond to the socket. Do not use any
adapters together with earthed electric tools
 Each time you work with an electrically operated machine, caution is advised! There
is a risk of electric shock, fire, cutting injury.
 Avoid body contact with earthed
 Protect the machine from dampness (causing a short circuit)
 Use power tools and machines never in the vicinity of flammable liquids and gases
(danger of explosion)
 Check the cable regularly for damage
 When working with the machine outdoors, use extension cables suitable for outdoor
use
 Do not use the cable to carry the machine or to fix the work piece
 Do not overload the machine
 You will work better and safer at specified power range.
 Use the correct power tool
 Do not use low-power machines for heavy work.
 Do not use the power tool for such purposes for which it was not designed. For
example do not use hand circular saw for cutting tree limbs or logs.
 Respectively trained people only and only one person shall operate the machine.
 Do not allow other people, particularly children, to touch the machine or the cable.
Keep them away from your work area.
 Make your workshop childproof.
 Wear suitable work clothes! Do not wear loose clothing or jewelry as they might be
caught and cause severe accidents!
 Wear a hair net if you have long hair.
 Loose objects can become entangled and cause serious injuries!
 Operation with safety gloves is forbidden. Safety gloves must only wear at saw blade
changing.
 Use personal safety equipment: ear protectors and safety goggles when working with
the machine.
 Wood dust may contain chemical substances that have a negative impact on personal
health. Work on the machine only in well-ventilated areas with suitable dust mask
perform!
 When working outdoors non-slip footwear is recommended.
 Never leave the machine running unattended! Before leaving the working area switch
the machine off and wait until the machine stops.
 Always disconnect the machine prior to any actions performed at the machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch
 Never use the power cord for transportation or manipulation of the machine!
 Never leave Before starting the machine remove any adjusting wrenches and
screwdrivers
 Use a clip or clamping jaws to secure the workpiece
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-KS210
SAFETY
25