Maintanance; Declaration Of Conformity - Kobra HDD Mode D'emploi

Before carrying out any maintenance or repairs on the internal parts of the machine, disconnect the
Power plug from the outlet.
KOBRA HDD does not require any particular

maintanance.

Daily lubrication of the first stage mechanism
with KOBRA oil is recommended for optimum
performance and to prolong the life of the cut-
ting mechanism. Lubrication must be done ma-
nually, applying KOBRA oil to the inside of the
shredding chamber of the top cutting mechani-
sm as illustrated in figure.
WARNING! Never use synthetic oil, benzene-ba-
sed products or any type of aerosol products for
cleaning the inside of the machine or cleaning in
the vicinity of the machine.

DECLARATION OF CONFORMITY

In accordance with: - directive LVD 2014/35/UE
The manufacturer: ELCOMAN SRL - VIA GORIZIA, 9 - 20813 BOVISIO MASCIAGO (MI) - ITALY
Declares herewith that the following device meets the standards of the LVD 2014/35/UE
KOBRA series: Kobra HDD
Applied standards:
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
Bovisio Masciago, 30.09.2020
A. De Rosa
Technical Office
MAINTANANCE
- directive 2011/65/CE
- directive 2014/30/UE
19 KOBRA HDD