Balluff BFF T-003-A2A-S4 Série Notice D'utilisation page 11

Inline flow controller with LEDs
BFF T_ _ _ _-_ _003-_ _ _A2A-S4
Installation and disassembly
Dimensional drawings
Fig. 5: Dimensions in millimeters
Installation instructions
Note maximum pressure rating for sensor: 20 bar.
Protect sensor supply voltage with a 1 A fast acting fuse
per IEC 60127.
Note maximum permissible switching current at 50 °C and
higher: 100 mA/10 K.
Do not install sensor and cables in the vicinity of strong
magnetic fields or cables carrying high currents.
To improve noise immunity with long cable runs use
shielded cables.
Use suitable means for connecting the connected pipes to
ensure a potential compensation between them.
www.balluff.com
Seals
Fig. 6: Seal dimensions
Observe pressure rating of the sensor.
Before startup check seal for medium compatibility and
pressure resistance.
english 3