Technical Description; Control Elements - Dometic GROUP WAECO CoolFun CX26 Mode D'emploi

Technical description

5 Technical description
The cooler is suitable for mobile use. You can cool products to a maximum
of 18 °C under the ambient temperature (CX26, CXT26, CX30) or warm
them to a maximum of 65 °C (CX30).
Its cooling system is a non-wearing Peltier cooling, the heat is discharged by
a fan.
5.1

Control elements

No. in
fig. 2, page 3
1
2
Only CX30:
The desired mode is selected with the cold/hot switch (fig. 2 2, page 3).
When the cooler is connected to a 230 V AC mains supply, it can be used in
two different operating modes:
 ECO mode: the cooler consumes less energy
 MAX mode: the cooler reaches maximum cooling capacity
The desired cooling capacity is selected with the cooling capacity control
(fig. 2 1, page 3):
➤ To increase the cooling capacity, turn the cooling capacity control clock-
wise.
For the maximum cooling capacity turn the cooling capacity control
clockwise all the way to the stop (max position).
➤ To decrease the cooling capacity, turn the cooling capacity control coun-
terclockwise.
To turn off the cooler, turn the cooling capacity control counterclockwise all
the way to the stop (off position).
When the cooler is connected to the DC socket, the cooling capacity cannot
be adjusted.
22
Description
Cooling capacity control
Cold/hot switch
CoolFun CX26, CXT26, CX30
EN