The recording bar that appears to indicate that a recording is being made, may have
different colours:
blue (Schedule):
yellow (Motion):
red (Alert):
pink (Alert or Motion):
light blue (Alert & Motion): Recording upon alert and motion notification (this must be
green (Manual):
Upon motion and alarm notification, the camera must transmit this signal to the network
video recorder. If the camera doesn't transmit these functions, they won't work on the
network video recorder.
Remarks:
Despite these signals not being transmitted to the network video recorder, one of these
functions might still be present on the IP camera.
Alecto cameras don't support these functions. Recordings can only be started manually and
via the time schedule.
8. RECORDING BAR COLOURS
Recording based on time schedule
Recording upon motion detection (this must be supported
by the camera)
Recording upon alert notification (this must be supported
by the camera)
Recording upon alert or motion notification (this must be
supported by the camera
supported by the camera
Recording is started manually
-99-