Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Recorded images are saved on the hard drive. You
may view these images by clicking the Play icon .
1.
Click the
pop-up screen.
2.
Select the desired channel you want to view.
(Tick for "all", or choice "1,2,3 or 4").
3.
Then select the day portion (recorded days are red-colored).
4.
Depending on the screen settings, 1 large screen appears or 4 smaller screens
(operating mode 1 Play is 1 screen, 4 Play is 4 screens).
5.
Using the setting 1 Play, only 1 camera can be played simultaneously. For this,
select the desired camera.
6.
Using the setting 4 Play, up to 4 cameras can be played simultaneously. In this
case, select all cameras.
7.
After this choice, select the day and time of the recording in the recording bar
at the bottom of the screen. Double-click the time bar to choose a time to start
playback.
8.
Use the operating buttons to control the video recording:
9.
Double-click one of the 4 screens to enlarge it to 1 screen. Double-click again to
restore the view with 4 screens.
10.
Click the "Full Screen" button to view in full screen mode.
7. PLAYBACK OF RECORDED IMAGES
icon to show the "Playback"
-98-
Publicité
Table des Matières
