Télécharger Imprimer la page

Publicité

Liens rapides

InBe
Angle valve with flexible hose cover
IB/06.45001.21
Montage instructies
Installation instructions
Notice de montage
Montageanweisungen
REV 02
27.05.2019

Publicité

loading

Sommaire des Matières pour clou InBe

  • Page 1 InBe Angle valve with flexible hose cover IB/06.45001.21 Montage instructies Installation instructions Notice de montage Montageanweisungen REV 02 27.05.2019...
  • Page 2 - Clou b.v. can not be held responsible for - Clou b.v. kan niet verantwoordelijk worden the results of improper use, improper gesteld voor de gevolgen van onaangepast...
  • Page 3 éventuellement Für andere Wände ist die verwendeten consolider le mur si nécessaire. regelnmittel an eigener Verantwortlichkeit, - Clou se réserve le droit pour tout und die Wand konnte Verstärkung changement technique ou optique par benötigen. rapport à la photo représentant le produit.
  • Page 4 Gegenstände auf das Produkt passend ist. Gebruiksvoorschriften: zie ook de onderhoudsvoorschriften op www.clou.nl User’s instructions: See also the maintenance guides at www.clou.nl max. Instructions d’utilisation: Voyer aussi les instructions de maintenance sur www.clou.nl 1 kg Gebrauchsanweisungen: Sehen Sie auch die Wartungsanweisungen am www.clou.nl...
  • Page 5 48,5 1/2"...
  • Page 6 M10 x 1 G 3/8” G 3/8” G 3/8” Ø 10 x 1 De zwarte krimpkous is geschikt voor de volgende flexibele of vaste aanvoerlei- dingen. The black heat shrink tube is suitable for the following flexible or fixed supply pipes. La gaine thermorétractable noire se convient aux tuyaux d’arrivée d’eau flexibles ou...
  • Page 7 Ø 10 mm Kiest U voor een vaste aanvoerleiding, zorg dan dat deze al de juiste lengte en vorm heeft. If you opt for a fixed supply pipe, make sure that it already has the correct length and shape. Si vous optez pour un tuyau d’arrivée d’eau fixe, assurez-vous qu’il a déjà...
  • Page 8 Schuif het langste stuk van de krimpkous zo ver mogelijk naar de bovenzijde. Zorg dat het uiteinde voldoende vrij is (X). Gebruik vervolgens een aansteker om de krimpkous te krimpen. Slide the longest part of the heat shrink tube as far as possible to the top.
  • Page 9 Monteer de aanvoerleiding op de kraan en de hoekstop kraan. Mount the supply pipe on the tap and the angle stop valve. Montez le tuyau d’arrivée d’eau sur le robinet et le robi- net d’équerre. Montieren Sie die Versor- gungsrohr am Armatur und das Absperrventil.
  • Page 10 Gebruik de aansteker om de krimpkous te laten krimpen. Use the lighter to shrink the heat shrink tube. Utilisez le briquet pour rétrécir la gaine thermoré- tractable. Schrumpfen Sie den Schrumpfschlauch mit dem Feuerzeug.
  • Page 12 Clou. Bath findings. Clou bv Thermiekstraat 1 NL-6361 HB Nuth T +31 (0)45 524 56 56 info@clou.nl www.clou.nl Looking for inspiration?