Parts And Features - Domo DO7074S Mode D'emploi

WWW.DOMO-ELEKTRO.BE DO7074S
20. The iron is not to be used if it has been dropped, if there are visible signs of dam-
age or if it is leaking.
21. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
22. Children should be supervised to ensure that they do not play with the appliance.

PARTS AND FEATURES

1. Temperature indicator light
2
1
2. Steam switch
3
3. Temperature Control Dial
4
4. Soleplate
5
6
5. Supply hose/Power cord
6. Iron rest plate
7. Water tank
8. Water tank release button
7
11
8
9. Power Cord
10
12
10. Power switch
11. Steam adjustable knob
12. Heating indicator light
9
1. Follow up the ironing instructions on the garment label.
2. Textile to which some kind of finish has been applied (gloss, crinkle, relief etc.) is
best ironed at lower temperature.
3. First sort laundry according to ironing temperature setting guide wool with wool,
cotton with cotton, etc.
4. The iron heats up more quickly than it cools down. Therefore, start ironing articles
that need to be ironed at the lowest temperature, such as those made of synthetic
fibres.
5. If the fabric consists of various kinds of fibres, always select the temperature
required by the most delicate fibres, i.e. the lowest temperature. for example, an
article consists of 60% polyester and 40% cotton, it should be ironed for polyester and
without steam.
6. If you do not know what kind of fabric the article is made of, iron a piece of the
material which is not visible when you wear to find out the appropriate temperature
for your articles.
7. Pure woolen fabrics (100% wool) should be ironed with the iron setting to steam
ironing position. It is advisable to set the temperature control button to "Max" position
and use a dry pressing cloth.
8. When steam ironing woolen fabrics, shiny patches may occur. You may prevent this
by turning the article inside out and ironing the reverse side.
9. After using of steam ironing for cotton fabrics, do not iron articles required by low-
29