16:9
4:3 LETTER BOX
4:3 PAN SCAN
Note
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
xSCREEN SAVER
Turns the screen saver on and off so that the
screen saver image appears when you leave
the receiver in pause or stop mode for
15 minutes, or when you playback a CD for
more than 15 minutes. The screen saver will
help prevent your display device from
becoming damaged (ghosting). Press H to
turn off the screen saver.
ON
Turns on the screen saver.
OFF
Turns off the screen saver.
xBACKGROUND
Selects the background color or picture on
the TV screen in stop mode or while playing
a CD.
JACKET
The jacket picture (still picture)
PICTURE
appears in the background, but
only when the jacket picture is
already recorded on the disc
(CD-EXTRA, etc.). If the disc
does not contain a jacket
picture, the "GRAPHICS"
picture appears.
GRAPHICS
A preset picture stored in the
receiver appears in the
background.
BLUE
The background color is blue.
BLACK
The background color is black.
xCOMPONENT OUT
This will change the type of signal output
from the COMPONENT VIDEO OUT jacks
on the receiver. See page 77, 78 for more
information about the different types.
Select this when you are
INTERLACE
connected to a standard
(interlace format) TV.
Select this when you have a
PROGRESSIVE
TV that can accept
progressive signals.
Notes
• Unless the COMPONENT VIDEO OUT/SCAN
SELECT switch on the back panel of the unit is set
to "SELECTABLE," you cannot select the above
setting.
• When "PROGRESSIVE" is selected in "SCREEN
SETUP," no signal is output from the MONITOR
(S VIDEO OUT) jack and the VIDEO (S VIDEO
OUT) jack.
US
67