7
Press X/x to select "LEVEL," then
press ENTER.
The selection items for "LEVEL" are
displayed.
CUSTOM SETUP
PARENTAL CONTROL
LEVEL:
STANDARD:
CHANGE PASSWORD
8
Select the level you want using X/x,
then press ENTER.
Parental Control setting is complete.
CUSTOM SETUP
PARENTAL CONTROL
LEVEL:
STANDARD:
CHANGE PASSWORD
The lower the value, the more strict the
limitation.
If you make a mistake
Press O RETURN/EXIT to go back to the
previous screen.
To turn off the Setup Display
Press DVD SETUP repeatedly until the
Setup Display is turned off.
To turn off the Parental Control
function and play the DVD after
entering your password
Set "LEVEL" to "OFF" in Step 8.
To change the password
1
In Step 5, select "CHANGE
PASSWORD t" using x, then press
ENTER.
The display for entering the password
appears.
2
Follow Step 3 to enter a new password.
OFF
8:
7:
NC17
6:
R
5:
4:
PG13
3:
PG
2:
1:
G
4:
PG13
USA
Playing the disc for which Parental
Control is set
1
Insert the disc and press H.
The PARENTAL CONTROL display
appears.
2
Enter your 4-digit password using the
number buttons, then press ENTER.
The receiver starts playback.
z
If you forget your password, remove the disc and
repeat Step 1 to 5 of "Limiting playback for
children." When you are asked to enter your
password, enter "199703" using the number buttons,
then press ENTER. The display will ask you to enter
a new 4-digit password. After you enter a new 4-digit
password in Step 3, replace the disc in the receiver
and press H. When the PARENTAL CONTROL
display appears, enter your new password.
Notes
• When you play DVDs which do not have the
Parental Control function, playback cannot be
limited on this receiver.
• Depending on the DVD, you may be asked to
change the parental control level while playing the
disc. In this case, enter your password, then change
the level. If the Resume Play mode is cancelled, the
level returns to the original level.
continued
US
57