How To Use The Water Kettle; Maintenance And Care - Bodum BISTRO 11451 Mode D'emploi

HOW TO USE THE WATER KETTLE

FILLING THE WATER KETTLE
– Remove the appliance body from the base unit (7).
– Open the lid (1), fill with water and close the lid again.
Do not fill the kettle with less than 0.15l/4 oz and not
more than 0.5l/17 oz (above the MAX mark), to prevent
the kettle from boiling dry or boiling water escaping from
the spout.
CONNECTION TO POWER SUPPLY
– After filling the kettle, position it on the base unit (7).
Ensure that the kettle body is seated correctly on the con-
tact unit on the base unit (7).
– Connect the mains plug to the power supply and move the
ON/OFF switch (5) into the ON (I) position.
Note: Ensure that the ON/OFF switch is able to move freely.
SWITCHING OFF
– Your kettle has an automatic ON/OFF switch and will switch
itself off automatically as soon as the water boils.
– You can switch off the kettle at any time by moving the ON/
OFF switch (5) into the OFF (0) position.
Note: The kettle cannot be switched off by hand if the
switch is obstructed for movement, or if the ON/OFF switch is
pressed into the ON (I) position.
POURING OUT WATER
– To remove the kettle from the base unit (7), hold it by its
handle. Ensure that the kettle body remains level while
lifting it from the base unit (7).
– Pour the water from the spout with the lid (1) closed.
Note: Please take care when pouring out water as boiling
water can cause scalds.
SWITCHING THE KETTLE ON AGAIN
– If the kettle was switched off by hand, it can be switched
on again at any time.
– You may switch the kettle on again as soon as the built-
in thermal safety cut-off switch has had sufficient time to
cool.

MAINTENANCE AND CARE

SCALE FILTER
Scale, or calcium, is a natural substance that forms when hard
water is boiled. The filter serves to retain the calcium in the
water kettle.
7