Mounting The Wheels; Seat Height Adjustment; Footrest Adjustment; Belt Adjustment - Kinderkraft LASTREE Guide D'utilisation

To change the function from cradle to feeding chair, remove the toy bar. Pull the plastic part of
the toy bar. Then lift both guides up (fig. G). Change the position of the backrest - press the
button at the back of the seat and move the backrest as far forward as possible (fig. DI). See also
chapter 6 on adjusting the footrest for the high chair function.
Tray assembly:
The tray consists of two parts: the tray and the overlay, which can be freely removed. Hold the
tray (3) so that the cup holder is at the top. Using the button at the bottom of the tray (Fig. H),
align the tray with the guides. Press and hold the button, at the same time insert the tray into
the guides (fig. I). The tray has three adjustment positions, slide the tray along the guides to the
desired position. When the tray (3) changes position you will hear a characteristic click.
Additionally check that the tray is properly secured on both sides.
3. Assembly of the basket:
Put the longer part of the basket (5) with the buttons through the metal rod under the seat (Fig.
J). Clip the buttons together. Attach the straps (located on the side of the basket and with plastic
elements at their and) to the hooks on the sides of the seat (fig. K). Remember. The maximum
load for the basket is 5 kg.

4. Mounting the wheels:

The product can be used with or without four wheels mounted. Each wheel has a brake. Wheels
can be unlocked by lifting the safety element (Fig. L). Place the chair on a soft surface. The legs
are finished with plastic elements and have 2 holes in them. Insert the protruding plastic part of
the wheel into the larger hole (Fig. L). Make sure that the connecting element is correctly
positioned. To remove the wheels, pull them towards you (fig. M). Caution! Do not move the
product when your child is using it.

5. Seat height adjustment:

The seat (regardless of whether it is being used as a cradle or a feeding chair) can be set at five
selected heights. Press the height adjustment buttons on both plastic parts connecting the seat
to the chair legs at the same time (Fig. N). Move the seat up or down to set the selected position
(fig. N I). Note: Never adjust the seat height with your child inside!

6. Footrest adjustment:

The footrest has three adjustment positions (fig. OI) (fig. OII) (fig. OIII). For the footrest function,
set the footrest to the position shown in figure OI. To lift the footrest, pull it up. To lower the
footrest, press the buttons on the sides of the footrest and pull it down. For the feeding chair,
insert an additional footrest (8) in the selected hole of the main footrest (fig. P).

7. Belt adjustment:

23