Berner 336206 Notice D'utilisation page 2

Creeper part no.: 336206 (EN)
Scope of delivery:
No. Designation
1 Creeper body
2 Head rest
3 Lock nut M6
4 Washer 8.5 x 16 x 1mm
5 Caster (swivel design)
6 Spacer tube 10 x 7.2 x 9.2mm
7 Bolt M6 x 25mm
8 Spanner size 10
Assembly instructions:
1. Guide the bolt into the caster and creeper body hole.
2. Place the spacer tube onto the bolt.
3. Place a washer onto the bolt and tighten using the lock nut.
Note: The spanner is intended for placing the lock nut.
Use a suitable socket spanner for tightening.
Instructions on use:
• Note the max. load capacity of 130 kg.
•
Do not use as step board.
•
Do not stand on the product.
•
Do not use if a caster is missing.
•
Do not use if you have detected any defect.
•
Store in upright position.
Quantity
1
1
12
12
6
12
12
1