Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TABLE OF CONTENTS
SCHEMATIC DRAWING
PARTS LIST
SYMBOLS
IMPORTANT SAFETY INSTRUCTIONS FOR
WARNING! The warnings and precautions discussed in the manual cannot cover all
possible conditions and situations that may occur. It must be understood by the user
!
that common sense and caution are factors which cannot be built into this product,
but must be supplied by the user.
SAVE THIS MANUAL: Keep this manual for the safety warning, precautions,
!
operations, inspections and maintenances. Keep the manual and the receipt in a
safe and dry place for future reference.
WARNING! To avoid serious personal injury, do not attempt to use this product until
!
you read the manual thoroughly and understand it completely. Save this manual
and review frequently for continuing safe operation and instructing others who may
use this tool.
SYMBOLS
Some of the following symbols may be used on this tool. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and safer.
Read operator's manual: To reduce the risk of injury, user must read and
understand operator's manual before using this product.
Eye protection: Always wear safety goggles, safety glasses with side shields, or a
full face shield when operating this product.
Risk to hearing: Always wear ear protection when using this tool. Failure to do so
may result in hearing loss.
GENERAL SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE OR INJURY TO PERSONS.
!
WARNING! When using tools, basic precautions should always be followed, including
the following.
WORK AREA
Keep the work area clean and well lit. Cluttered benches and dark areas increase
the risk of accidents.
p.11
p.12
p.13
p.13
p.15
p.16
p.16
p.17
p.18
p.19
p.20
13
Publicité
Chapitres
Table des Matières
Dépannage
